TM 5-4210-249-13&P-3
0535-1
DRAFT
0535
FIELD LEVEL MAINTENANCE
POWER STEERING PUMP MODIFICATION
INITIAL SETUP:
REMOVAL
NOTE
•
The vehicle engine air compressor and steering pump have switched
positions (WP 0002).
By switching positions, fittings, and rotor vane housing positions
have changed on steering pump.
•
Tag and mark hoses prior to removal to ensure proper installation.
•
Remove cable ties as required.
•
Position suitable drain pan under hoses to catch excess oil.
•
Cap and plug hoses upon removal.
1.
Remove hose (1) from elbow (2).
2.
Remove hose (3) from elbow (4).
3.
Remove hose 2301 (5) from elbow (6).
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
TFFT04252
Tools and Special Tools
Cap Set, Protective (WP 0622, Item 3)
Drain Pan (WP 0622, Item 9)
Tool Kit, General Mechanic’s: Automotive
(WP 0622, Item 27)
Materials/Parts
Adhesive, Sealant (WP 0625, Item 5)
Compound, Sealing (WP 0625, Item 17)
Sealing Compound Loctite 592
(WP 0625, Item 21)
Tags, Identification (WP 0625, Item 51)
Ties, Cable, Plastic (WP 0625, Item 58)
Materials/Parts (continued)
Lockwasher (5)
Gasket (1)
Preformed Packing (1)
Preformed Packing (2)
References
WP 0615, Fig. 115
Equipment Conditions
Hydraulic reservoir drained
(TM 9-2320-325-14&P)