TM 5-4210-249-13&P-3
0538-2
DRAFT
0538
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Wear goggles and use care when replacing spring.
Spring is under tension and can
act as a projectile when released.
Failure to comply may result in injury to
personnel.
NOTE
Note position of spring prior to removal to ensure proper installation.
4.
Bend two tabs (10) back, and remove spring (11) from hinge (5).
5.
Remove seal (12) from pump house access door (1).
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful
vapors, and are harmful to skin and clothing.
To avoid injury or death, keep away
from open fire and use in well-ventilated area.
If adhesive, solvent, or sealing
compound gets on skin or clothing, wash immediately with soap and water.
6.
Clean seal (12) residue from pump house access door (1) with mineral spirits.
END OF TASK
TFFT00145A
WARNING
ICON 26
WARNING
ICON 30, 44, 27