TM 5-4210-249-13&P-3
0339-1
DRAFT
0339
FIELD LEVEL MAINTENANCE
PUMP OPERATOR’S PANEL WATER LEVEL GAUGE REPLACEMENT
INITIAL SETUP:
REMOVAL
NOTE
•
Tag and mark connectors and wires prior to removal to ensure proper installation.
•
Remove cable ties as required.
1.
Disconnect three connectors (1).
2.
Cut two wires (2) (TM 9-2320-325-14&P).
3.
Remove four screws (3) and water level gauge (4) from pump operator’s panel (5).
END OF TASK
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
TFFT00599
Tools and Special Tools
Tool Kit, General Mechanic’s: Automotive
(WP 0622, Item 27)
Materials/Parts
Tags, Identification (WP 0625, Item 51)
Ties, Cable, Plastic (WP 0625, Item 58)
References
WP 0615, Fig. 56
Equipment Conditions
Batteries disconnected (TM 9-2320-325-14&P)
Pump operator’s panel housing opened
(WP 0325)