TM 5-4210-249-13&P-3
0349-1
DRAFT
0349
FIELD LEVEL MAINTENANCE
REAR MARKER/CLEARANCE LED REPLACEMENT
INITIAL SETUP:
REMOVAL
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
NOTE
All rear marker/clearance LEDs are removed the same way.
Passenger side shown.
1.
Remove two screws (1), washer (2), locknuts (3), marker/clearance LED (4), and marker/clearance LED
cover (5) from vehicle.
Discard locknuts.
2.
Disconnect connector (6) from back of marker/clearance LED (4).
3.
Remove marker/clearance LED cover (5) from connector (6).
END OF TASK
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
TFFT00777
Tools and Special Tools
Tool Kit, General Mechanic’s: Automotive
(WP 0622, Item 27)
Materials/Parts
Locknut (2)
References
WP 0615, Fig. 64
Equipment Conditions
Batteries disconnected (TM 9-2320-325-14&P)
Wheels chocked (TM 9-2320-347-10)
Light bezel cover removed (driver side
only) (WP 0397)