TM-5-4210-249-13-P-3

TACTICAL FIRE FIGHTING TRUCK (TFF) MODEL M1142

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL WITH REPAIR PARTS AND SPECIAL TOOLS LIST (INCLUDING DEPOT REPAIR PARTS AND SPECIAL TOOLS); PART 3 OF 4

FEBRUARY 2009

TM-5-4210-249-13-P-3 - Page 271 of 1488

TM 5-4210-249-13&P-3

0361-1

DRAFT

0361

FIELD LEVEL MAINTENANCE

120-VOLT POWER CORD(S) REPLACEMENT

INITIAL SETUP:

REPLACEMENT

NOTE

•

Tag and mark wires prior to removal to ensure proper installation.

•

Remove cable ties and cushion clips as required.

•

This procedure only shows routing of 120-volt power cords.

It will never be necessary to

remove all 120-volt power cords at once.

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

- -

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

Tools and Special Tools

Tool Kit, General Mechanic’s: Automotive

(WP 0622, Item 27)

Materials/Parts

Tags, Identification (WP 0625, Item 51)

Ties, Cable, Plastic (WP 0625, Item 58)

References

WP 0615, Fig. 75

Equipment Conditions

120-Volt receptacle removed

(if necessary) (WP 0362)

Equipment Conditions (continued)

Water tank heater power cord removed

(if necessary) (WP 0300)

Piping heat trace power cord removed

(if necessary) (WP 0604)

Cord reel power cord removed

(if necessary) (WP 0381)

Crew cab air conditioner/heater control box power

cord removed (if necessary) (WP 0201)

Battery chargers(s) receptacle removed

(if necessary) (WP 0365)

120-Volt power cord removed from circuit breaker

box (WP 0373)