TM 5-4210-249-13&P-3
0448-2
DRAFT
0448
REMOVAL
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
CAUTION
Equipment (ladder) rack must be raised approximately 3/4 up to allow compartment
doors to be opened.
Failure to comply may result in damage to equipment.
NOTE
•
Tag and mark wires prior to removal to ensure proper installation.
•
Note routing of driving side body wire harness prior to removal to ensure proper
installation.
•
Note position and remove cable ties, split looms, and cushion clips as required.
•
Remove driver side body wire harness so that entire wire harness is routed into driver side
stowage compartment D3.
•
Perform Step (1) and (2) if power is supplied to ladder rack motors.
1.
Raise ladder rack (1) approximately 3/4 up.
2.
Disconnect batteries (TM 9-2320-325-14&P).
TFFT03483