TM-5-4210-249-13-P-4
TACTICAL FIRE FIGHTING TRUCK (TFF) MODEL M1142
TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL WITH REPAIR PARTS AND SPECIAL TOOLS LIST (INCLUDING DEPOT REPAIR PARTS AND SPECIAL TOOLS); PART 4 OF 4
FEBRUARY 2009
TM-5-4210-249-13-P-4 - Page 300 of 1012
TM 5-4210-249-13&P-4
0610-6
DRAFT
0610
EXPLANATION OF CROSS-REFERENCE INDEXES WORK PACKAGES FORMAT AND COLUMNS
1.
National Stock Number (NSN) Index Work Package.
NSNs in this index are listed in National Item
Identification Number (NIIN) sequence.
STOCK NUMBER Column.
This column lists the NSN in NIIN sequence.
The NIIN consists of the last
nine digits of the NSN.
When using this column to locate an item, ignore the first four digits of the NSN.
However, the complete NSN should be used when ordering items by stock number.
For example, if the NSN is 5385-01-574-1476, the NIIN is 01-574-1476.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
FIG. Column.
This column lists the number of the figure where the item is identified/located.
The
figures are in numerical order in the repair parts list and special tools list work packages.
ITEM Column.
The item number identifies the item associated with the figure listed in the adjacent FIG.
column.
This item is also identified by the NSN listed on the same line.
2.
Part Number (P/N) Index Work Package.
Part numbers in this index are listed by part number in ascending
alphanumeric sequence (vertical arrangement of letters and number combinations which places the first letter
or digit of each group in order A through Z, followed by the numbers 0 through 9 and each following letter or
digit in like order).
PART NUMBER Column.
Indicates the part number assigned to the item.
FIG. Column.
This column lists the number of the figure where the item is identified/located in the repair
parts list and special tools list work packages.
ITEM Column.
The item number is the number assigned to the item as it appears in the figure
referenced in the adjacent FIG. column.
SPECIAL INFORMATION
1.
Usable on Code (UOC).
The UOC appears in the lower left corner of the description column heading.
Usable on codes are shown as “UOC:.
..” in the description column (justified left) on the first line under the
applicable item/nomenclature.
Uncoded items are applicable to all models.
Identification of the UOCs used in
this RPSTL are:
2.
Fabrication Instructions.
Bulk materials required to manufacture items are listed in the bulk material
functional group of this RPSTL.
Part numbers for bulk material are also referenced in the description column
of the line item entry for the item to be manufactured/fabricated.
Detailed fabrication instructions for items
source coded to be manufactured or fabricated are found in TM 9-2320-325-14&P.
3.
Index Numbers.
Items which have the word BULK in the figure column will have an index number shown in
the item number column.
This index number is a cross-reference between the NSN / Part Number (P/N)
Index work packages and the bulk material list in the repair parts list work package.
Code
Used On
FFT
TFFT
NSN e.g.
NSN
NIIN
Back to Top
