TM-5-5420-202-20-1
M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60
TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 1 OF 4
OCTOBER 1985
TM-5-5420-202-20-1 - Page 76 of 1020
TM 5-5420-202-20-1
SUSPENSION
(Continued)
Item
Use
21.
Install inner bearing oil seal on
compensating arm spindle and
roadwheel arm spindle (used with
remover and replacer handle 7082881 )
Seal
Inserter
(7078977)
Install outer bearing oil seal on
roadwheel arm support spindle (used
with remover and replacer handle
(7082881)
22.
Seal Inserter
(7078973)
Install inner bearing oil seal on
track support roller wheel
23.
Seal Inserter
(7082882)
Install oil seal and retainer
assembly on compensating idler arm
Seal Inserter
(8708188)
24.
Remove and install final drive hub
and sprocket assembly
25.
Wire Rope Assembly
(8366458)
Shock Absorber Bearing Replacer
(11654533)
Remove shock absorber bearing
26.
Remove and install roadwheel
and compensating idler arm
support spindle retaining nut
27.
Spanner Wrench
(12284929)
Remove roadwheel arm torsion. bar
end plug
Socket Wrench Adapter
(7078976)
28.
Remove and install bearing adjusting
nut on roadwheel track support
roller and compensating idler wheel
29.
Face Wrench Socket
(12257561)
Sprocket Tooth Gage
(8708388)
Check wear of final drive sprockets
30.
Check grease actuated track
adjusting link pressure
Dial
Pressure Gage
(12310644)
30.1
Bearing Driver
(12290993)
Remove and install track adjusting
link bearing
30.2
30.3
Remove and install shock absorber
yoke bracket bushing (used with
handle, item 14)
Remover and Replacer
(12326059)
3-3
Back to Top
