TM-5-5420-202-20-2

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 2 OF 4

OCTOBER 1985

  TM-5-5420-202-20-2 - Page 225 of 734

TM 5-5420-202-20-2
FUEL PUMP REPLACEMENT - RIGHT FUEL TANK (Sheet 4 of 6)
INSTALLATION:
1. Position packing (A) around pump (B) and,
using hands, install clamps (C) around
packing (A) and pump (B).
2.
Go on to Sheet 5
7-8
Using screwdriver and 3/8 inch wrench,
secure ground lead (D) to fuel pump (B)
with screw (E), lockwasher (F), and nut (G).
3. Using 7/16 inch socket, secure ground
lead (D) and clamp (H) to bracket (J)
with two screws (K) and two lockwashers (L).
4. Position fuel pump (B) in mounting bracket (J)
so that pump discharge port (M) will be directly
beneath stamped lettering “PUMP DISCHARGE
LOCATION” on access cover (N). Lock pump in
bracket by closing clamp lever (P).
5. Position new gasket (Q) on mounting bracket (J).
Apply sealing compound to threads of one screw
(R). Install one screw (R) through access cover
(N) and gasket (Q) into mounting bracket (J).
Leave screw (R) loose.


Back to Top