TM 5-5420-202-20-4
SPEEDOMETER ADAPTER ROTATING BRACKET ASSEMBLY REPLACEMENT (Sheet 1 of 2)
TOOLS: Diagonal cutting pliers
Slip joint pliers
Ratchet with 1/2 in. drive
7/16 in. socket with 1/2 in. drive
5 in. extension with 1/2 in. drive
SUPPLIES:
Lockwire (Item 61, Appendix D)
Lockwashers (4 required)
PRELIMINARY PROCEDURE:
Remove speedometer shaft adapter assembly
(page 19-11)
REMOVAL:
1.
Using cutting pliers, remove lockwire
(A) from four screws (B). Throw lockwire
away.
2.
Using socket and extension, remove four
screws (B) and lockwashers (C).
3.
Remove rotating bracket assembly (D).
Go on to Sheet 2
TA248634
19-9