TM-5-5420-202-20-4

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 4 OF 4

OCTOBER 1985

  TM-5-5420-202-20-4 - Page 220 of 534

TM 5-5420-202-20-4
FIXED FIRE EXTINGUISHER MOUNTING BRACKET REPAIR (Sheet 1 of 1)
TOOLS: Needle nose pliers
PRELIMINARY PROCEDURE: Remove cylinders (page 20-52)
NOTE
Repair procedures for first short bracket
and second shot bracket are the same.
Second shot bracket is shown.
DISASSEMBLY:
1.
Using pliers, remove cotter pin (A) hold-
ing straight pin (B) in mounting bracket
(C).
2.
Using fingers, remove straight pin (B)
securing latch (D) to mounting bracket
(C).
3.
Remove latch (D) from mounting bracket
(C).
ASSEMBLY:
1.
Place latch (D) in position on mounting
bracket (C).
2.
Insert straight pin (B) through latch
(D) and mounting bracket (C).
3.
Using pliers, install new cotter pin (A)
through straight
4.
Install cylinders
End of Task
pin (B).
(page 20-54).
TA248720
20-62


Back to Top