TM-5-5420-202-20-4

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 4 OF 4

OCTOBER 1985

TM-5-5420-202-20-4 - Page 419 of 534

TM 5-5420-202-20-4

GENERAL MAINTENANCE (Sheet 2 of 33)

Inspection and Repair of Cast Parts and Machined Surfaces (Sheet 1 of 2)

SUPPLIES:

Dry cleaning solvent (Item 55, Appendix D)

Rubber gloves

Crocus cloth (Item 14, Appendix D)

1.

Check interior of cast parts and machined

surfaces for scoring, burring, and pitting.

WARNING

Cleaning

agent

specified

is

flammable.

Use only in well

ventilated areas. Keep away from

flames, sparks, or heat. Do not

smoke

while

using.

Prevent

contact with eyes, mouth, and/or

Wear rubber gloves when

skin.

performing cleaning procedures.

2.

If minor scoring, burring, or pitting

is found, wearing rubber gloves, use

crocus cloth dipped in solvent to repair

surface.

3.

If crocus cloth dipped in solvent does

not get rid of scoring, burring, or pitting,

or if part is excessively scored, worn,

pitted, or burred, throw part away.

Go on to Sheet 2

C-3