TM-5-5420-202-24P

LAUNCHER, M60A1 AND M48A5 TANK CHASSIS, TRANSPORTING: FOR BRIDGE, ARMORED VEHICLE LAUNCHED, SCISSORING TYPE,CLASS 60

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST INCLUDING DEPOT MAINTENANCE REPAIR PARTS

JANUARY 2006
TM-5-5420-202-24P

  TM-5-5420-202-24P - Page 34 of 1509

TM5-
5420-
202
-24P
0001 00
0001 00-5
4. Spare/repair parts that make up an assembled item are listed immediately following the assembled
line item entry.
5. NSN (or part number if no NSN is assigned) for bulk materials is referenced in this column in the line
item entry for the item to be manufactured/fabricated.
6. When the item is not used with all serial numbers of the same model, the effective serial numbers are
shown on the last line(s) of the description (before UOC).
7. The usable on code, when applicable (see Special Information).
8. In the Special Tools work package, the basis of issue (BOI) appears as the last line(s) in the entry for
each special tool, special TMDE, and other special support equipment.
When density of equipment
supported exceeds density spread indicated in the basis of issue, the total authorization is increased
proportionately.
9. The statement END OF FIGURE appears just below the last item description in column (6) for a given
figure in both the repair parts list and special tools list work packages.
QTY (Column (7)).
The QTY (quantity per figure) column indicates the quantity of the item used in the
breakout shown on the illustration/figure, which is prepared for a functional group, subfunctional group, or
an assembly.
A “V” appearing in this column instead of a quantity indicates that the quantity is variable
and the quantity may change from application to application.
EXPLANATION OF CROSS-REFERENCE INDEXES WORK PACKAGES FORMAT AND COLUMNS
1.
National Stock Number (NSN) Index Work Package.
STOCK NUMBER Column.
This column lists the NSN by National Item Identification Number (NIIN)
sequence.
The NIIN consists of the last nine digits of the NSN.
NSN
NIIN
When using this column to locate an item, ignore the
first four digits of the NSN.
However, the complete
NSN should be used when ordering items by stock
number.
FIG. Column.
This column lists the number of the figure where the item is identified/located.
The figures
are in numerical order in the repair parts list and special tools list work packages.
ITEM Column.
The item number identifies the item associated with the figure listed in the adjacent FIG.
column.
This item is also identified by the NSN listed on the same line.
2.
Part Number (P/N) Index Work Package.
P/Ns in this index are listed in ascending alphanumeric
sequence (vertical arrangement of letter and number combinations which places the first letter or digit of
each group in order A through Z, followed by the numbers 0 through 9 and each following letter or digit in
like order).
CAGEC Column.
The Commercial and Government Entity Code (CAGEC) is a 5-digit alphanumeric code
used to identify the manufacturer, distributor, or Government agency, etc., that supplies the item.
PART NUMBER Column.
Indicates the P/N assigned to the item.
STOCK NUMBER Column.
This column lists the NSN for the associated part number and manufacturer
identified in the PART NUMBER and CAGEC columns to the left.


Back to Top