TM-5-5420-203-14

BRIDGE, ARMORED VEHICLE LAUNCHED, SCISSORING TYPE CLASS 60 & CLASS 70 ALUMINUM, 60 FOOT SPAN; FOR M48A5 AND M60 LAUNCHER

TECHNICAL MANUAL; OPERATOR’S, UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE

JUNE 1991

TM-5-5420-203-14 - Page 242 of 298

TM 5-5420-203-14

CENTER SECTION

e.

f.

g.

h.

i.

MISCELLANEOUS COMPONENTS REPLACEMENT (Sheet 3 of 3)

Place two screws (17) through pipe anchor clamp (18). Position clamp on center section

(5). Install two new lock washers (16) and two nuts (15) on two bolts (17). Tighten nuts (15).

Place two flat washers (28) on two screws (26). Position angle bracket (27) on center section (5).

install two screws (26) through angle bracket and center section (5). Install two new lock

washers (25) and two nuts (24) on two screws (26). Tighten screws (26).

Place flat washer (33) on screw (31). Install screw (31) through spring tension clip (32). Install

screw, flat washer, and spring tension clip in mounting hole located on center section (5). Place

new lock washer (30) and nut (29) on screw (31). Tighten nut (29).

Place two flat washers (38) on two screws (36). Insert two screws (36) in angle bracket (37).

Place screws in mounting hole on center section (5). Place two new lock washers (35) and two

nuts (34) on two screws (36). Tighten nuts (34).

Place two screws (42) in pipe flange (43) and install on center section (5). Place two flat washers

(41), two new lock washers (40), and two nuts (39) on two screws (42). Tighten nuts (39).

END OF TASK

3-76