TM-5-5420-203-24P

BRIDGE, ARMORED-VEHICLE LAUNCHED: SCISSORING TYPE CLASS 60 (5420-00-522-9599) AND CLASS 70 (5420-01-370-3933) ALUMINUM 60 FOOT SPAN; FOR USE WITH M48 AND M60 LAUNCHER (ALL MAKES AND MODELS)

TECHNICAL MANUAL; ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; REPAIR PARTS AND SPECIAL TOOLS LIST (INCLUDING DEPOT MAINTENANCE REPAIR PARTS)

NOVEMBER 1988
TM-5-5420-203-24P

  TM-5-5420-203-24P - Page 15 of 64

TM5-5420-203-24P C02
6
(1) FSCM column.
The Federal Supply Code for Manufacturer (FSCM) is a 5-digit numeric
code used to identify the manufacturer, distributor, or Government agency, etc., that supplies the item.
(2) PART NUMBER column.
Indicates the primary number used by the manufacturer
(individual, firm, corporation, or Government activity), which controls the design and characteristics of the
item by means of its engineering drawings, specifications standards, and inspection requirements to identify
an item or range of items.
(3) STOCK NUMBER column.
This column lists the NSN for the associated part number
and manufacturer identified in the PART NUMBER and CAGEC columns to the left.
(4) FIG. column.
This column lists the number of the figure where the item is identified /
located in Section II and III.
(5) ITEM column.
The item number is that number assigned to the item as it appears in
the figure referenced in the adjacent figure number column.
c. FIGURE AND ITEM NUMBER INDEX.
(1) FIG. column.
This column lists the number of the figure where the item is identified /
located in Section II and III.
(2) ITEM column.
The item number is that number assigned to the item as it appears in
the figure referenced in the adjacent figure number column.
(3) STOCK NUMBER column.
This column lists the NSN for the item.
(4) FSCM column.
The Federal Supply Code for Manufacturer (FSCM) is a 5-digit numeric
code used to identify the manufacturer, distributor, or Government agency, etc., that supplies the item.
(5) PART NUMBER column.
Indicates the primary number used by the manufacturer
(individual, firm, corporation, or Government activity), which controls the design and characteristics of the
item by means of its engineering drawings, specifications standards, and inspection requirements to identify
an item or range of items.
5. Special Information.
a. USABLE ON CODE.
Not applicable.
b. FABRICATION INSTRUCTIONS.
Not applicable.
c. ASSEMBLY INSTRUCTIONS.
Detailed assembly instructions for items source coded to be
assembled from component spare / repair parts are found in TM5-5420-203-14 manual.
Items that make up
the assembly are listed immediately following the assembly item entry or reference is made to an applicable
figure.
d. KITS.
Line item entries for repair parts kits appear as the last entries in the figure where kit
parts are listed as repair parts.
e. INDEX NUMBERS.
Not applicable.


Back to Top