TM-5-5420-228-24
LAUNCHER HYDRAULICS SYSTEM M48A5/M60A1 TANK CHASSIS, TRANSPORTING: FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60
TECHNICAL MANUAL; ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT; MAINTENANCE MANUAL
AUGUST 1985
TM-5-5420-228-24 - Page 19 of 750
TM 5-5420-228-24
HOW TO USE THIS MANUAL - Continued
•
Bridge will not be shown on vehicle on locator views.
•
Locator views will show tongue in travel position (folded on top of vehicle) unless
maintenance procedure requires it in another position.
•
MASTER BATTERY switch should be in OFF position prior to performance of any
maintenance procedures.
•
Diagrams of the hydraulic systems with reference designators, part numbers, and related
maintenance tasks are on pages 3-67 thru 3-70.2. Schematic diagrams of the hydraulic
system are located at the back of this manual (page FP-1 and FP-3).
•
All torque values are dry torques unless otherwise specified.
•
A maintenance information index lists all maintenance tasks. It provides the location of all
maintenance tasks related to a component in this manual.
•
As a general maintenance practice, throw away all removed lockwashers, locknuts, o-rings,
preformed packings, and cotter pins and replace with new lockwashers, locknuts, o-rings,
preformed packings, and cotter pins at installation.
•
Hydraulic/Electrical Updated Vehicle procedures/components are identified as HEU.
•
Change 3 contains procedures for both the M48A5AVLB and the M60A1 AVLB launchers.
Any references to LO 5-5420-202/226-12 or TM 5-5420-202/226-10, will reference LO-12
or TM-10.
They are to be construed to be referencing your vehicles lubrication order or
operating manual.
iv
Change 3
Back to Top
