TM-5-5420-228-24
LAUNCHER HYDRAULICS SYSTEM M48A5/M60A1 TANK CHASSIS, TRANSPORTING: FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60
TECHNICAL MANUAL; ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT; MAINTENANCE MANUAL
AUGUST 1985
TM-5-5420-228-24 - Page 49 of 750
TM 5-5420-228-24
1.
2.
3.
4.
SIMPSON 160
PLUG BLACK LEAD INTO -COM JACK.
(E.G. TO MEASURE 24 VOLTS DC, TURN SELECTOR TO VDC 50.
TO MEASURE LESS THAN 10 VOLTS, TURN SELECTOR TO VDC
PLUG RED LEAD INTO +JACK.
10. TO MEASURE LESS THAN 2.5 VOLTS, TURN SELECTOR TO
VDC 2.5.)
SET POLARITY REVERSING SWITCH TO DIR/+DC POSITION.
IF YOU ARE UNSURE OF VOLTAGE TO BE MEASURED, TURN
SELECTOR TO VDC 1000 FOR FIRST READING, THEN REDUCE
RANGE AS SHOWN ABOVE FOR THE AN/URM-105 MULTIMETER.
TURN SELECTOR SWITCH TO PROPER VDC RANGE FOR VOLTAGE
USING YOUR RANGES, NEXT READING WOULD BE MADE IN
YOU WISH TO MEASURE.
VDC 50A POSITION.
DC voltage measurement setup.
TA251316
2-16
Back to Top
