TM-9-1240-400-34-P

TELESCOPE; PANORAMIC: M115, ELBOW: M139, MOUNT: M138 AND M137

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

OCTOBER 1993

TM-9-1240-400-34-P - Page 154 of 344

TM 9-1240-400-34&P

Section VII. PREEMBARKATION INSPECTION PROCEDURES

4-12.

GENERAL.

a.

Fire control instruments must be inspected for outward appearance, mechanical condition, and proper

operation.

b.

Instruments must approach new equipment standards of operation and appearance.

The workmanship and

quality must reflect the highest standards obtainable.

4-13.

SPECIFIC INSTRUCTIONS.

Fire control instrument must conform to the following specifications for overseas shipment.

a.

Functioning of Mechanical Parts.

Mechanical parts must operate smoothly without binding or rough motion.

Parts must be free from grit and must be properly lubricated.

b.

Illumination.

The extension light must illuminate properly.

c.

General Appearance and Condition of the Instruments.

(1)

All parts of the instruments must be present and free from defects.

(2)

Paint must cover all specified surfaces.

Repaint if painted surfaces show signs of damage.

(3)

Any fire control instrument failing to meet the requirements of the final inspection is unsatisfactory for

overseas shipment.

(4)

All warning labels must be present and legible.

4-29/(4-30 blank)