TM-9-1290-262-24-P
AIMING CIRCLE, M2A2, W/E
TECHNICAL MANUAL; UNIT, DIRECT SUPPORT,AND GENERAL SUPPORT MAINTENANCE MANUAL
SEPTEMBER 1994
TM-9-1290-262-24-P - Page 15 of 192
ARMY TM 9-1290-262-24&P
MARINE CORPS TM 00476C-24&P
AIR FORCE TO 49A7-3-72/74
Section IV. REPAIR PARTS; TOOLS; SPECIAL TOOLS; TEST,
MEASUREMENT, AND DIAGNOSTIC EQUIPMENT (TMDE);
AND SUPPORT EQUIPMENT
Section Index
Paragraph
Page
1-11.
Common Tools and Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5
1-12.
Special Tools, TMDE, and Support Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5
1-13.
Repair Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . 1-5
1-11. COMMON TOOLS AND EQUIPMENT.
For authorized common tools and equipment, refer to the Modified Table of Organization and
Equipment (MTOE), CTA 50-970, or CTA 8-100, as applicable to your unit.
1-12. SPECIAL TOOLS, TMDE, AND SUPPORT EQUIPMENT.
Special tools, TMDE, and support equipment are identified in the maintenance allocation chart (MAC),
appendix B. Instructions for fabricating special tools and test equipment are provided in appendix E.
1-13. REPAIR PARTS.
Repair parts are listed and illustrated in appendix C.
1-5/1-6 blank
Back to Top
