TM-9-2320-209-10-1

2 1/2-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; OPERATION, INSTALLATION AND REFERENCE DATA; OPERATOR LEVEL

SEPTEMBER 1980

TM-9-2320-209-10-1 - Page 333 of 549

TM 9-2320-209-10-1

1.

2.

3.

CAUTION

Do not let A-frame go past center. It will free

and damage equipment.

Operate rear winch,

refer to paragraph 4-14b, to raise A-frame (1) up to

about an 80° position.

Reset boom chains (2) to support A-frame (1) in this position.

CAUTION

Too much slack will allow A-frame to smash down on

cab roof.

Take hook end of winch cable (3) from left center lashing ring (4) and hook it

onto pintle (5).

Leave a small amount of slack (about 2 feet) in winch cable.

GO TO FRAME 3

4-279