TM-9-2320-209-10-1

2 1/2-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; OPERATION, INSTALLATION AND REFERENCE DATA; OPERATOR LEVEL

SEPTEMBER 1980

  TM-9-2320-209-10-1 - Page 62 of 549

TM 9-2320-209-10-1
c.
Driver’s Compartment Controls and Indicators - Cont.
1. TRANSFER CASE shift lever. 7. Transfer POWER TAKE OFF LEVER.
Moved to (DOWN) LOW for heavy
Supplies power to operate auxiliary
load conditions and to (UP) HIGH for
equipment when in the up position.
light load conditions.
8. Handbrake control lever. Is pulled
2.
Backrest control lever. Used to
up to set handbrake. The knob at
change position of the lower section
the top of the handle is turned to
of the backrest.
set brake cable tension.
3.
Seat cushion control lever. Used to 9.
Shifting lever hinge lock. Locks
move rear portion of seat cushion up
transmission power take-off lever
or down.
in neutral position.
4.
Seat horizontal control lever. Used 10.
POWER TAKE OFF SHIFTS LEVER.
to move seat forward or backward.
Is moved forward to HIGH or LOW
5. Slotted bracket. Used to move front
position to give power to front winch
of seat cushion up or down.
for reeling in a load. Moved to REV
(reverse) position to release or lower
6.
Locking bar.
Locks power take-off
a load.
lever in off position when bar is
turned to up and down position.
~
‘f
L.
TA 044947
4-8


Back to Top