TM-9-2320-209-10-4
2 1/2-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; MAINTENANCE; OPERATOR LEVEL
SEPTEMBER 1980
TM-9-2320-209-10-4 - Page 66 of 87
TM 9-2320-209-10-4
Section VII. SPECIAL PURPOSE KITS EQUIPMENT ITEMS MAINTENANCE
2-14. BOW AND TARP KITS INSTALLATION AND REMOVAL.
TOOLS:
Cross-tip screwdriver (Phillips type)
SUPPLIES: Chalk
PERSONNEL: Two
EQUIPMENT CONDITION: Truck parked, engine off, handbrake set.
CAUTION
Do not fold or stow paulin or end curtains if
they are wet. When folding, make sure surface
they are spread on is dry. Canvas can be
damaged if it is stowed while wet.
a. Installation of Bow Assemblies.
FRAME 1
1.
2.
On cargo trucks with dropsides, take corner and stake assemblies (1) out of
storage sockets in front of rack (2). On trucks without dropsides, take
corner and stowage assemblies (1) from storage area on truck bed.
Unbuckle two straps (3), one on each side of truck, and take out bows (4).
GO TO FRAME 2
2-54
Back to Top
