TM-9-2320-209-20-2-1

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 2 OF 3; PART 1 OF 2

MAY 1981

  TM-9-2320-209-20-2-1 - Page 176 of 645

TM 9-2320-209-20-2-1
Test fuel tank pump pressure
Remove fuel pump output line from
elbow. Refer to Vol 3, chapter 4,
para 4-5
Put Pressure gage fitting in elbow and
tighten using 1/2-inch wrench
Turn accessory switch to “ON”. Refer
to TM 9-2320-209-10
See if gage reading is between 5 and
7 psi
Turn switch to “OFF”. Refer
to
TM 9-2320-209- 1.0
Using 1/2-inch wrench unscrew
and take out pressure gage fitting
Put back fuel line. Refer to Vol 3,
chapter 4, para 4-5
TA 114153
Figure 16-5
16-6


Back to Top