TM-9-2320-209-20-2-1
2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 2 OF 3; PART 1 OF 2
MAY 1981
TM-9-2320-209-20-2-1 - Page 19 of 645
TM 9-2320-209-20-2-1
CHAPTER 4
TEST EQUIPMENT PROCEDURES INDEX
4-1. GENERAL. This chapter has a test equipment procedures index which tells you
where to find the tests you need to do your troubleshooting.
4-2. INDEX. The test equipment procedures index is divided into three columns that
list test equipment, tests, and figure numbers. The following breakdown tells you
what is in each column.
a. Test Equipment Column. This column tells you what kind of equipment you
need to do your troubleshooting tests. For all electrical tests, a multimeter is used.
The multimeter can be any one of three models fielded for your use. These models
are given in the test equipment column. For mechanical tests, test equipment is also
given, along with the part number of the equipment.
b. Tests Column. This column tells you what tests are given in this manual. Next
to each piece of test equipment are listed the tests that you can do with that equip-
ment. This column also gives troubleshooting tests which can be done without using
test equipment.
c. Figure Column. This column tells you where you can find the tests in this
manual. The first test given is the DC Voltage test. The figures given for this test
are 28-2, 28-8, and 28-14. Three figures are given for each multimeter test because
there are three multimeter models.
4-1
Back to Top
