TM-9-2320-209-20-3-1

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 1 OF 4

MAY 1981

TM-9-2320-209-20-3-1 - Page 142 of 830

TM 9-2320-209-20-3-1

FRAME 2

I

1.

2.

3.

4.

Put cover (l) over four studs (2) and seat cover firmly on gasket (3).

NOTE

Some pumps use three studs (2) to mount terminal cover(l).

Put four lockwashers (4) onstuds (2) and screw on four nuts (5). Using wrench,

tighten nuts.

Thread end of wire on metallic seal (6) through hole in end of one stud (2). Thread

end of wire back into metallic seal and squeeze seal using lead seal press.

Join connector (7) to receptacle (8).

NOTE

Follow-on Maintenance Action Required:

Start truck and let engine run. Refer to TM 9-2320-209-10.

END OF TASK

TA 04713 7

4-54