TM-9-2320-209-20-3-1

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 1 OF 4

MAY 1981

TM-9-2320-209-20-3-1 - Page 179 of 830

TM 9-2320-209-20-3-1

c. Replacement.

1.

2.

3.

4.

5.

WARNING

Dry cleaning solvent is flammable. Do not use near

an open flame. Keep a fire extinguisher nearby when

solvent is used. Use only in well-ventilated places.

Failure to do this may result in injury to personnel

and damage to equipment.

Clean surfaces of housing assembly (1) and mounting elbow (2) with solvent.

Put gasket (3) on four threaded studs (4).

Press housing assembly (1) over threaded studs (4) until it is seated

against gasket (3).

Put clamp (5) holding ignition harness (6) on bottom right threaded stud (4).

Using 1/2-inch wrench, screw on and tighten four nuts (7) with four lockwashers (8).

GO TO FRAME 2

TA 047064

4-91