TM-9-2320-209-20-3-1
2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 1 OF 4
MAY 1981
TM-9-2320-209-20-3-1 - Page 213 of 830
TM 9-2320-209-20-3-1
c. Replacement.
1.
Slide two clamps (l) on ignition unit (2).
Slide one clamp up to ridge at top of
ignition unit.
2.
Set spacing between clamps (1) so holes in clamps line up with two threaded
studs (3).
3.
Put two clamps (1) over threaded studs (3).
Put two lockwashers (4) on studs and
screw on two nuts (5).
Using 1/2-inch wrench, tighten nuts.
GO TO FRAME 2
TA 04705 7
4-125
Back to Top
