TM-9-2320-209-20-3-1

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 1 OF 4

MAY 1981

TM-9-2320-209-20-3-1 - Page 285 of 830

TM 9-2320-209-20-3-1

5-4. EXHAUST SYSTEM (HORIZONTAL) REMOVAL AND REPLACEMENT

(TRUCKS M50A1, M50A2, AND M50A3).

TOOLS :

3/4-inch wrench (2) 6-inch extension

9/16-inch wrench (2) 10-inch extension (2)

1/2-inch wrench

Universal

9/16-inch wrench

3/4-inch socket

Hammer

Rachet

Chisel Cross-tip screwdriver (Phillips type)

Rubber mallet Pliers

SUPPLIES: Bypass valve gasket

Front exhaust pipe gasket

Exhaust pipe extension pipe gasket

Exhaust manifold elbow gasket

Fording valve top gasket (trucks M50A1 and M50A2)

Fording valve bottom gasket (trucks M50A1 and M50A2)

Extension bypass pipe gasket (truck M50A3)

PERSONNEL : T

WO

EQUIPMENT CONDITION :

Truck parked, engine off and cool, handbrake set.

a.

Preliminary Procedure. Remove air cleaner. Refer to para 4-3.

WARNING

Do not work on hot exhaust systems.

Personnel can be badly burned.

5-17