TM-9-2320-209-20-3-1

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 1 OF 4

MAY 1981

TM-9-2320-209-20-3-1 - Page 638 of 830

TM 9-2320-209-20-3-1

7-54. ELECTRIC HORN REMOVAL AND REPLACEMENT.

TOOLS:

7/16-inch wrench

SUPPLIES:

Tags

PERSONNEL: One

EQUIPMENT CONDITION:

Truck parked, engine off, handbrake set.

a.

Preliminary Procedure. Disconnect battery ground cable. Refer to para 7-58.

b.

Removal.

FRAME 1

1.

2.

3.

4.

NOTE

On trucks equipped with front winch, horn is mounted

below headlamp.

Using 7/16-inch wrench, unscrew and take off two screws and washers (1).

Take horn assembly (2) far enough out of cutout in panel (3) to take off

plugs (4 and 5).

NOTE

Tag electrical plugs before taking them off to be sure

they are put back in the right place.

Take electrical plugs (4 and 5) off horn assembly (2).

Take away horn assembly (2).

END OF TASK

7-202