TM-9-2320-209-20-3-2

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 2 OF 4

MAY 1981

TM-9-2320-209-20-3-2 - Page 203 of 552

TM 9-2320-209-20-3- 2

FRAME 4

CAUTIO N

1 .

2 .

3 .

Do not tighten coupling nuts too much. Screw on an d

finger tighten coupling nuts onto fittings, then usin g

wrench, tighten nuts 1/8 turn .

Put tube (1) between two elbows (2) as shown .

Using 13/16-inch wrench, screw on and tighten two coupling nuts (3) .

Using 5/8-inch wrench, screw on and tighten two coupling nuts (4) on te e

fitting (5) .

NOT E

Follow-on Maintenance Actio n

1. Start engine and let air pressur e

TM 9-2320-209-10 .

Required :

build .

Refer t o

2. Do leak test of air svstem. Refer to Part 1, para 1-5 .

3. If working on truck M275A2, replace right rea r

splash guard .

Tell direct support maintenance .

4. If working on truck M342A2, replace muffler and rea r

exhaust pipe .

Refer to Part 1, para 5-3 .

END OF TAS K

13-19 0