TM-9-2320-209-20-3-2

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 2 OF 4

MAY 1981

TM-9-2320-209-20-3-2 - Page 371 of 552

TM 9-2320-209-20-3- 2

1 .

2 .

3 .

Using hammer and brass drift, tap seal (1) into place on wheel hu b

NOT E

Put back bearing (3) with tapered end facing away fro m

wheel hub spindle (2) .

spindle (2) .

Using hammer and brass drift, tap bearing (3) into place with tapered en d

away from wheel hub spindle (2) .

Using clean rag, wipe all grease from seal (1) .

Follow-o n

Replace rear hu b

END OF TAS K

NOT E

Maintenance Action Required :

and drum assembly. Refer to para 14-9 .

14-7 2