TM-9-2320-209-20-3-3

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 3 OF 4

MAY 1981

TM-9-2320-209-20-3-3 - Page 153 of 548

TM 9-2320-209-20-3-3

18-33. CENTRIFUGAL PUMP REMOVAL AND REPLACEMENT (TRUCKS M49A1C AND

M49A2C).

TOOLS: 9/16-inch wrench (2)

3/4-inch wrench

3/16-inch sockethead screw key (Allen wrencher equivalent)

Mallet

Flat-tip screwdriver

SUPPLIES: Elbow inlet tube gasket

Outlet tube gasket

PERSONNEL: One

EQUIPMENT CONDITION:

Truck parked, engine off, handbrake set.

WARNING

Smoking, sparks or open flame are not allowed

within 50 feet of fuel truck during this task.

Fuel may burn, causing explosion, injury to

personnel, and damage to equipment.

a. Removal.

FRAME 1

1.

Open fuel truck rear compartment doors.

2.

Using allen wrench, loosen setscrew (1) in yoke (2).

GO TO FRAME 2

18-138