TM-9-2320-209-20-3-3

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 3 OF 4

MAY 1981

TM-9-2320-209-20-3-3 - Page 211 of 548

TM

9-2320-209-20-3-3

FRAME 3

1.

2.

3.

4.

5.

6.

7.

8.

Using pipe wrench,

screw nipple (1) with larger valve (2) into larger fitting

on automatic dump valve housing (3). Tighten nipple (1) so that valve

handle is toward left side of truck.

Using pipe wrench, screw nipple (4) with smaller valve (5) into smaller

fitting on automatic dump valve housing (3). Tighten nipple (4) so that

valve handle is toward left side of truck.

From underneath truck, push nipple (6) up into place through smaller hole

in compartment floor (7).

Using pipe wrenches, hold valve (5) and screw in and tighten nipple (6).

From underneath truck, push pipe (8) up into place through larger hole in

compartment floor (7).

Using pipe wrenches, hold valve (2) and screw in and tighten pipe (8).

Turn handles of valves (2 and 5) right to closed position.

Close rear compartment doors.

END OF TASK

18-196