TM 9-2320-209-20-3-3
FRAME 3
1.
2.
3.
4.
5.
GO
Put upper rod (1) and lower rod (2) in place.
Put in two cotter pins (3). Using pliers, bend
Put handle (4) in place and put in pin (5) .
open ends of cotter pins.
Put slide (6) in place and using 9/16-inch wrench, screw in and tighten two
cap screws (7) .
Do step 4 again on bottom of door ( 8).
TO FRAME 4
18-418