TM-9-2320-209-20-3-3
2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 3 OF 4
MAY 1981
TM-9-2320-209-20-3-3 - Page 53 of 548
TM
9-2320-209-20-3-3
18-13. COMPANION SEAT REPAIR (EARLY MODEL TRUCKS).
TOOLS: Pliers
1/2-inch wrench (2)
SUPPLIES:
None
PERSONNEL: One
EQUIPMENT CONDITION:
Truck parked, engine off, handbrake set.
NOTE
Repair of companion seat is limited to removal
and replacement of seat cushion and backrest.
a. Removal.
FRAME 1
1.
NOTE
All trucks except trucks M275A1 and M275A2 have same
hinge pins on both sides of companion seat. Trucks
M275A1 and M275A2 have clevis pins (1) with cotter pin
(2) on right side of seat and clevis pin welded to frame
on left side of seat.
Check hinge pin to see if it is a clevis pin or a bolt.
If it is a clevis pin, go to step 1. If it is a bolt, go to
frame 2.
Using pliers, pull out two cotter pins (2). Push out and take away two clevis
pins (1).
GO TO FRAME 3
18-38
Back to Top
