TM-9-2320-209-20-3-4

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 4 OF 4

MAY 1981

  TM-9-2320-209-20-3-4 - Page 311 of 410

TM 9-2320-209-20-3-4
f.
Replacement.
FRAME 1
1.
Put two cables (1), joined to slave receptacle assembly (2), through hole
in cab (3). Aline screw holes in slave receptacle assembly and cab. Using
7/16-inch wrenches, screw in and tighten four capscrews (4), four lockwashers
(5), and four nuts (6).
2.
Put two grommets (7) in holes on cab floor.
Put longer of two cables (1) into
grommet closest to door and shorter cable into other grommet.
3.
Put two clamps (8) on two cables (1) and line screw holes in clamps with
holes on U-channel (9). Using screwdriver, screw in and tighten two
screws (10).
GO TO FRAME 2
23-84


Back to Top