TM-9-2320-209-20P
2 1/2 TON, 6X6 TRUCK
ORGANIZATIONAL MAINTENANCE; REPAIR PARTS AND SPECIAL TOOLS LISTS
DECEMBER 1989
TM-9-2320-209-20P - Page 11 of 805
TM 9-2320-209-20P
Section I. INTRODUCTION
1. Scope.
This manual lists repair parts; special tools; test,
measurement, and diagnostic equipment (TMDE), and
other support equipment required for operation and
performance of organizational maintenance of the 2-1/2
ton truck. It authorizes the requisitioning and issue of
spares and repair parts as indicated by the source and
maintenance codes.
2. General.
This Repair Parts and Special Tools List is divided into
the following sections:
a. Section II. Repair Parts List.
A list of repair
parts authorized for use in the performance of
maintenance. The list also includes parts which must
be removed for replacement of the authorized parts.
Parts lists are composed of functional groups in
ascending numerical sequence, with the parts in each
group listed in figure and item number sequence. Bulk
materials are listed in NSN sequence.
b. Section III. Special Tools List.
A list of special
tools. TMDE, and support equipment authorized for
the performance of maintenance at the direct and
general support levels.
c. Section IV. National Stock Number and Part
Number Index.
A list, in National item identification
number (NIIN) sequence, of all National stock
numbers (NSN) appearing in the listings, followed by
a list, in alphameric sequence, of all part numbers
appearing in the listings. National stock numbers and
part numbers are cross-referenced to each illustration
figure and item number appearance.
3. Explanation of Columns.
The following provides an explanation of columns
found in the tabular listings:
a. I//ustration.
This column is divided as follows:
(1) Figure Number.
Indicates the figure number
of the illustration in which the item is shown.
(2) Item Number.
The number used to identify
item called out in the illustration.
b. Source, Maintenance, and Recoverability Codes
(SMR).
(1) Source code.
Source codes are assigned to
support items to indicate the manner of acquiring
support items for maintenance, repair, or overhaul of
end items. Source codes are entered in the first and
second positions of the Uniform SMR Code format as
follows:
Code
PA
PB
PC
PD
PE
PF
PG
KF
KB
M O
MF
AO
XA
XB
XC
Definition
- Item procured and stocked
or known usage.
- Item procured and stocked
for anticipated
for insurance
purpose because essentiality dictates that a
minimum quantity be available in the
supply system.
- Item procured and stocked and which
otherwise would be coded PA except that it
is deteriorative in nature.
- Support item, excluding support
equipment, procured for initial issue or
outfitting and stocked only for subsequent
or additional initial issues or outfittings.
Not subject to automatic replenishment.
- Support equipment procured and stocked
for initial issue or outfitting to specified
maintenance repair activities.
- Support equipment which will not be
stocked but which will be centrally
procured on demand.
- Item procured and stocked to provide for
sustained support for the life of the
equipment. It is applied to an item peculiar
to the equipment which, because of
probable discontinuance or shutdown of
production facilities, would prove
uneconomical to reproduce at a later time.
- An item of a maintenance kit and not
purchased separately. Maintenance kit
defined as a kit that provides an item that
can be replaced at organizational or
intermediate levels of maintenance.
- Item included in both a depot
overhaul/repair kit and a maintenance kit.
- Item to be manufactured or fabricated at
organizational level.
- Item to be manufactured or fabricated at
the direct support maintenance level.
- Item to be assembled at organizational
level.
- Item is not procured or stocked because the
requirements for the item will result in the
replacement of the next higher assembly.
- Item is not procured or stocked. If not
available through salvage, requisition.
- Installation drawing, diagram, instruction
sheet, field service drawing, that is identified
by manufacturer’s part number.
Change 1
V
Back to Top
