TM-9-2320-209-34-2-1

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 1 OF 3

MAY 1981

TM-9-2320-209-34-2-1 - Page 225 of 770

frame 4

TM 9-2320-209-34-2-1

1.

Unplug holes in three fuel injectors (1) and three holes in injector pump

head (2).

2.

Put three fuel injector tubes (3) in place. Put on three tube nuts (4) and

three tube nuts (5).

3.

Tighten three tube nuts (5) to 23 to 25 pound-feet.

4.

Slide three dust covers (6) into place.

5.

Put four clamps (7) in place. Put in four capscrews

6.

Put outer clamp (9) in place. Put in two capscrews,

self-locking nuts (10).

NOTE

and nuts (8).

flat washers, and

Follow-on Maintenance Action Required:

1.

Fill cooling system.

Refer to TM 9-2320-209-20.

2.

Close hood and side panels. Refer to

TM 9-2320-209-10.

END OF TASK

2-196