TM-9-2320-209-34-2-1

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 1 OF 3

MAY 1981

TM-9-2320-209-34-2-1 - Page 276 of 770

FRAME 17

TM 9-2320-209-34-2-1

1.

Make sure surface of intake manifold flange (1) is clean. Put gasket (2)

on flange.

2.

Hold thermostat housing (3) in engine compartment as shown.

3.

Join hose (4) to thermostat housing (3) but do not tighten clamp (5).

4.

Put thermostat housing (3) against intake manifold flange (1). Make sure

lip (6) of thermostat housing seats in recess (7) of intake manifold flange.

GO TO FRAME 18

2-247