TM-9-2320-209-34-2-1

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 1 OF 3

MAY 1981

TM-9-2320-209-34-2-1 - Page 328 of 770

FRAME 1

TM 9-2320-209-34-2-1

7-7. REAR WIRING HARNESS REMOVAL AND REPLACEMENT (ALL TRUCKS EXCEPT

M275A1 AND M275A2).

TOOLS: No special tools required

SUPPLIES: None

PERSONNEL: One

EQUIPMENT CONDITION:

Truck parked, engine off, handbrake set.

a. Preliminary Procedure. Disconnect battery ground cable. Refer to

TM 9-2320-209-20.

NOTE

Refer to removal and replacement procedures given

in TM 9-2320-209-20 if needed to take off connectors

and electrical leads covered in the following steps.

Tag all leads so that they are put back in the right

place.

b. Removal.

7-13