TM-9-2320-209-34-2-1
2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 1 OF 3
MAY 1981
TM-9-2320-209-34-2-1 - Page 404 of 770
frame 2
TM 9-2320-209-34-2-1
NOTE
Shock absorber mounting hole in clamp plates (1 and 2)
must be on outside and toward rear of truck.
1.
Put right clamp plate (1) on two U-bolts (3).
2.
Put left clamp plate (2) on two U-bolts (4).
3.
Put on eight nuts and lockwashers (5). Tighten nuts evenly to 170 to 180
pound-feet.
GO TO FRAME 3
10-5
Back to Top
