TM-9-2320-209-34-2-1

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 1 OF 3

MAY 1981

TM-9-2320-209-34-2-1 - Page 416 of 770

frame 1

TM 9-2320-209-34-2-1

d. Inspection and Repair.

NOTE

Readings must be within limits given in table 10-1. If

readings are not within given limits, throw away parts

and get new ones.

1.

2.

3.

4.

Using micrometer, measure

Using micrometer, measure

Using micrometer, measure

Using micrometer, measure

GO TO FRAME 2

outside diameter of steering knuckle pins

outside diameter of ball stud (2).

inside diameter of steering knuckle sleeve (3).

inside diameter of bushing (4 and 5).

Index

Number

1

2

3

4 and 5

Table 10-1. Front Axle Assembly (Steering Knuckle) Wear Limits

Item/Point of Measurement

Steering knuckle pin (outside

diameter)

Ball stud (outside diameter)

Steering knuckle sleeves (inside

diameter)

Bushing (inside diameter)

Size and Fit

of New Parts

(inches)

1.1240 to 1.1235

1.245 to 1.235

1.248 to 1.250

1.1250 to 1.1260

Wear Limit

(inches)

1.1230 to 1.1240

1.225 to 1.245

1.248 to 1.250

1.1250 to 1.1260

10-17