TM-9-2320-209-34-2-1

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 1 OF 3

MAY 1981

TM-9-2320-209-34-2-1 - Page 452 of 770

frame 10

TM 9-2320-209-34-2-1

1.

Using hammer and brass drift pin, drive out through shaft (1) to rear of

carrier case (2).

2.

Take off rear bearing outer race (3).

3.

Place two channels (6) across bed of press (7).

4.

Place two steel spacers (8) across channels (6).

5.

Put adapter (9) from kit, pn 4231596, in place as shown.

6.

Press bearing (4) and spacer (5) off through shaft (1).

GO TO FRAME 11

10-53