TM-9-2320-209-34-2-1

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 1 OF 3

MAY 1981

TM-9-2320-209-34-2-1 - Page 567 of 770

TM 9-2320-209-34-2-1

c.

Inspection and Repair.

1.

Check that brake drum (1) is not warped or cracked. If brake drum is warped

or cracked, throw away drum and get a new one.

2.

Check that brake drum (1) is not scored or pitted. If brake drum is scored or

pitted, measure inside diameter (2). If inside diameter is more than 15.130

inches, throw away drum and get a new one.

3.

If inside diameter (2) is not more than 15.130 inches and brake drum (1) is

scored or pitted, cut drum. Cut drum only as needed to take off scores and

pitting.

Refer to TM 9-4910-482-10.

4.

If brake drum (1) was cut, measure inside diameter (2). If reading is more

than 15.130 inches, throw away drum and get a new one.

NOTE

Follow-on Maintenance Action Required:

Replace brake drum. Refer to TM 9-2320-209-20.

END OF TASK

12-6