TM-9-2320-209-34-2-2

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 3

MAY 1981

TM-9-2320-209-34-2-2 - Page 116 of 899

TM 9-2320-209-34-2-2

b. Cleaning.

WARNING

c.

Dry cleaning solvent is flammable. Do not use

near an open flame. Keep a fire extinguisher

nearby when solvent is used. Use only in well-

ventilated places. Failure to do this may result

in injury to personnel and damage to equipment.

(1) Clean part with solvent.

(2) If needed, use steam, wire brushes or scrapers to take off grease or gum.

Inspection and Repair.

(1) Check that fender has no dents, cracks, bends, loose or cracked welds

or holes.

(2) Fix dents in fender with a peening hammer or rubber mallet.

(3) Fix cracks or holes in fender by welding. Refer to TM 9-237.

(4) If more repair is needed, get a new part.

(5) Paint fender after repair. Refer to TM 43-0139.

17-99