TM-9-2320-209-34-2-2
2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 3
MAY 1981
TM-9-2320-209-34-2-2 - Page 18 of 899
TM 9-2320-209-34-2-2
CHAPTER 17
BODY, CAB, AND HOOD GROUP MAINTENANCE
Section I. SCOPE
17-1. EQUIPMENT ITEMS COVERED.
This chapter gives equipment maintenance
procedures for hood and cab components, fenders, running boards, and body com-
ponents and special purpose body components for which there are authorized
corrective maintenance tasks at the direct and general support maintenance levels.
17-2. EQUIPMENT ITEMS NOT COVERED.
All equipment items for which corrective
maintenance is authorized at the direct and general support maintenance levels are
covered in this chapter.
Section II.
HOOD AND CAB COMPONENTS
17-3.
HOOD SIDE PANELS REMOVAL, REPAIR, AND REPLACEMENT.
TOOLS:
No special tools required
SUPPLIES:
Solvent, dry cleaning, type II (SD-2), Fed. Spec P-D-680
Clean rags
PERSONNEL: One
EQUIPMENT CONDITION:
Truck parked, engine off, handbrake set.
a.
Preliminary Procedures.
(1) If working on right, side hood panel, remove air cleaner, cap, and inlet
screen. Refer to TM 9-2320-209-20.
(2) Open hood and side panels. Refer to TM 9-2320-209-10.
17-1
Back to Top
