TM-9-2320-209-34-2-2

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 3

MAY 1981

TM-9-2320-209-34-2-2 - Page 187 of 899

TM 9-2320-209-34-2-2

There are no special cleaning procedures needed. Refer to

cleaning procedures given in Part 1, para 1-3.

NOTE

Clean all parts before inspection and before

assembly.

d.

Inspection and Repair.

FRAME 1

1.

Check that all threaded parts are not stripped or crossheaded. If parts are

damaged, get new ones.

2.

Check that lashing hook (1), latch rods (2), latch guides (3), caution plate

(4), and instruction plate (5) are not bent or dented. Straighten bent or

dented parts. Refer to FM 43-2. If more repair is needed, get new parts.

3.

Check that door latch (6) is not damaged. If door latch is damaged, get a

new one.

4.

Check that pump compartment door (7) is not bent, dented, torn or cracked.

Straighten bends or dents. Refer to FM 43-2. Weld cracks. Refer to

TM 9-237. If more repair is needed, get a new part.

5.

Check that lock cylinder (8) is not damaged. If part is damaged, get a

new one.

END OF TASK

17-170