TM 9-2320-209-34-2-2
FRAME 4
1.
Slide rubber seals (1) into place over pipe connection.
2.
Put two halves of coupling (2) in place. Put in two screws (3) and put on two
nuts (4).
3.
Do steps 1 and 2 again for coupling (5), then
4.
Put line (6) in place and tighten two coupling
NOTE
tighten four nuts (4).
nuts (7).
Follow-on Maintenance Action Required:
1.
Replace filter segregator access cover. Refer to
TM 9-2320-209-20.
2.
Refill filter segregator with fuel. Refer to
TM 9-2320-209-10.
END OF TASK
17-205