TM-9-2320-209-34-2-2

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 3

MAY 1981

TM-9-2320-209-34-2-2 - Page 439 of 899

TM 9-2320-209-34-2-2

(3) Cleaning, inspection, and repair.

WARNING

Dry cleaning solvent is flammable. Do not use

near an open flame. Keep a fire extinguisher

nearby when solvent is used. Use only in well-

ventilated places. Failure to do this may result

in injury to personnel and damage to equipment.

(a) Cleaning. Using dry cleaning solvent, clean all parts. Use a stiff

brush if needed. After cleaning, use cold water to rinse off any solvent.

(b) Inspection. Check that all parts have no cracks, breaks

distortion.

(c) Repair. Weld any cracks or breaks found in inspection.

TM 9-237. Hammer out any bends or dents. Refer to FM 43-2.

(4) Assembly.

or

Refer to

1.

Aline shackle (1) and shackle

bracket (2). Put shackle pin (3) in place.

2.

Put cotter pin (4) in shackle pin (3).

END OF TASK

17-422