TM-9-2320-209-34-2-2
2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 3
MAY 1981
TM-9-2320-209-34-2-2 - Page 47 of 899
TM 9-2320-209-34-2-2
d.
Cleaning. There are no special cleaning procedures needed. Refer to
cleaning procedures given in Part 1, para 1-3.
NOTE
Clean all parts before inspection and before assembly.
e.
Inspection and Repair.
1.
Check that cab body (1), instrument panel (2), glove compartment (3), grab
handle (4), plate (5), and vent door (6) have no cracks, dents, holes or torn
welds. Straighten dents. Refer to FM 43-2. Weld cracks, holes, and torn
welds. Refer to TM 9-237.
2.
Check that vent screen (7), vent gasket (8), and hinge pin (9) have no breaks
or other damage. If parts are damaged, get new ones in their place.
GO TO FRAME 2
17-30
Back to Top
